Surgex SX-DS-156 Manuel d'utilisateur télécharger pdf (Page 6)

User Manual

Software Version 2.7

2. PC Setup and Driver Installation:

Data interface cable model XG-PCS-IC-1 (optional)

Please Note:

The MULTIPAK may be accessed by a PC while connected to AC power and equipment or while

disconnected from AC power and equipment.

If accessed by a PC while connected to AC power: For best protection, it is recommended that the

power cord of the computer is plugged into an available receptacle on the MULTIPAK.

Connecting the MULTIPAK to a PC allows for the availability of the

following features:

• Import data stored in the MULTIPAK’s device memory

• Import data from a stored data file

• Export data to a data file

• Export data to a report in PDF format

• Set over and under voltage shutdown thresholds

• Clear device memory

• Real-time AC voltmeter

• Enhanced Logging Mode

Equipment required for PC communication:

• MULTIPAK

• MULTIPAK Data Interface Cable (optional)

• MULTIPAK Diagnostic Software (Revision 2.7)

• PC running Windows 2000 or later with a CD-ROM and USB port and

a minimum screen resolution of 1024 x 768

CAUTION – Do not install this device if there

is not at least 10 meters (30 feet) or more of

wire between the electrical outlet and the

electrical service panel.

La PRUDENCE - n’installe pas cet artifice s’il

n’y a pas au moins 10 mèters (30pieds) ou

plus de fil entre l’issue èlectrique et le comitè

de service èlectrique.

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Pas de commentaire

Surgex SX-DS-156 Manuel d'utilisateur Page 6