Surgex SX-AX20E Manuel d'utilisateur télécharger pdf (Page 22)

User Manual

Firmware Version v2.04.281

6.5 Device Commands

Command

Description

Admi

Fact Def

get outlet <1‐10>

Returns the status of the specified outlet. AC outlets are numbers 1-8. Aux Relays

A and B are numbers 9 and 10.

set outlet <1‐10> <on/off/reboot>

Sets the selected outlet to the selected state. The user must have rights to

the selected

get devicename

Returns the device name.

Axess ELITE

set devicename <devicename>

Sets the device name.

Yes

get reboot

Returns the Reboot Time.

set reboot <1-99>

Sets the Reboot Time in seconds.

get delay

Returns the Delay Time.

set delay <0-99>

Sets the Delay Time in seconds.

get console

Returns the current console timeout and baud rate.

set autologout <0-99>

Sets the automatic logout timeout of web and CLI in minutes. 0 = no timeout.

Yes

set baud < 2400 | 9600 | 57600 | 115200 >

Sets the serial port baud rate.

Yes

9600

clear shutdown

Clears a persistent shutdown state.

set clear shutdown by user < yes | no >

Sets the ability of a user account to clear a persistent shutdown state.

Yes

get upload enable

Returns the status of the ability to accept a firmware upload.

set upload enable < yes | no >

Sets the ability to accept a firmware upload.

Yes

clear log

Clears history text log file.

Yes

set factory defaults

Resets all parameters, except Network Settings, to their factory default settings.

Confirmation is required. Note: This command may take up to 30 seconds to execute.

Yes

logout

Ends the session.

reboot

Reboots the unit. Will not affect the status of the outlets.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

Commentaires sur ces manuels

Pas de commentaire

Surgex SX-AX20E Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Surgex SX-AX20E